Interior SLIP™ Install

 

There are a few items you should be aware of if you wish to install SLIPs on the interior side of sash?

 

  • Will the installation of SLIPs on the interior face of the sash interfere with any hardware? If hardware is in the way, mometimes hardware can be moved to a different location to make way while still allowing an aesthetic look. You must make sure there is a 1.5 inch clearance of any hardware or any other interference on all sides within the interior daylight size. The face must be a clear and flat surface. Hardware that could interfere are usually locks or handles
  • Must make sure the SLIP would have enough room to fit on the interior sash face and not interfere with the interior sash stops. ou must make sure there is a 1.5 inch clearance of any hardware or any other interference on all sides within the interior daylight size.
  • On a doublehung, will the top SLIP fit between the bottom sash check rail when flitting flush on the upper sash? This can be case by case for different windows. Sometimes you must plane bottom sash check rail to allow for better clearance. SLIPs sit 5/16 inch above the face of the sash.